Back to top
R. J. ELECTRICALS PVT. LTD.
X
Product Description
We are a prominent name in this domain, affianced in manufacturing, exporting and supplying top grade Control Panel for Gas Detectors. The provided panel is manufactured using quality tested components by our diligent professionals. This panel is used for monitoring the gas detectors. Apart from this, the offered Control Panel for Gas Detectors can be bought from us at rock bottom prices.
Key Points:
- Simple to operate
- Longer service life
- Defect free
- Robust design
FEATURES:
- Fully confirms IS 2189.
- Operates on 230 V AC, 50 Hz AC supply
- Battery backup with built in charger
- Leakage / fault status in different colored LED indications.
- 16 x 2 line dot matrix LCD display.
- Detector wise Leakage, open, short LED indications.
- External switches to test each detector leakage, open, short status manually.
- External switches for reset, Silence, LED test.
- Detector isolation facility with loop voltage cutoff.
- Relay O/P for actuators.
- Mains on, System On, Charger on, visual indications.
- Battery Low indications
- Enough inside space for battery
DO:
- The panel and detectors should be within the temperature range of oC.
- We strongly recommend you to check the panel on daily basis and the detectors on weekly basis.
- Ensure 230 voltage input level before switching ON the Panel. If the voltage fluctuation is more than 10% use UPS supply or voltage stabilizer.
DON'T:
- Don't fix the panel/ detector in high range of vibrating area
- Don't put the panel cables near to the high voltage area
- Don't fix the panel in highly moisture surrounded area
- Don't connect the power cable wrongly, this will break the warranty
Other Products in 'Gas Detector System (Wall-Hung)' category
E-43, Sector 5, Bawana Industrial Area, Delhi - 110039, India
Mr Gaurav Anchalia
(Manager)
|
|
 |
R.J. ELECTRICALS PVT. LTD
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd.(Terms of Use) Developed and Managed by Infocom Network Ltd. |